The role of the paraspinal muscles in the development of adolescent idiopathic scoliosis based on surface electromyography and radiographic analysis.

BACKGROUND: Patients with idiopathic scoliosis commonly present with an imbalance of the paraspinal muscles. However, it is unclear whether this muscle imbalance is an underlying cause or a result of idiopathic scoliosis. This study aimed to investigate the role of paraspinal muscles in the development of idiopathic scoliosis based on surface electromyography (sEMG) and radiographic analyses. METHODS: This was a single-center prospective study of 27 patients with single-curve idiopathic scoliosis. Posteroanterior whole-spine radiographs and sEMG activity of the erector spinae muscles were obtained for all patients in the habitual standing position (HSP), relaxed prone position (RPP), and prone extension position (PEP). The Cobb angle, symmetrical index (SI) of the sEMG activity (convex/concave), and correlation between the two factors were analyzed. RESULTS: In the total cohort, the mean Cobb angle in the HSP was significantly greater than the mean Cobb angle in the RPP (RPP-Cobb) (p < 0.001), whereas the mean Cobb angle in the PEP (PEP-Cobb) did not differ from the RPP-Cobb. Thirteen patients had a PEP-Cobb that was significantly smaller than their RPP-Cobb (p = 0.007), while 14 patients had a PEP-Cobb that was significantly larger than their RPP-Cobb (p < 0.001). In the total cohort and two subgroups, the SI of sEMG activity at the apex vertebra (AVSI) in the PEP was significantly greater than 1, revealing significant asymmetry, and was also significantly larger than the AVSI in the RPP. In the RPP, the AVSI was close to 1 in the total cohort and two subgroups, revealing no significant asymmetry. CONCLUSION: The coronal Cobb angle and the SI of paraspinal muscle activity in AIS patients vary with posture changes. Asymmetrical sEMG activity of the paraspinal muscles may be not an inherent feature of AIS patients, but is evident in the challenging tasks. The potential significance of asymmetric paraspinal muscle activity need to be explored in further research.

Transforming the CRISPR/dCas9-based gene regulation technique into a forward screening tool in Plasmodium falciparum.

It is a significant challenge to assess the functions of many uncharacterized genes in human malaria parasites. Here, we present a genetic screening tool to assess the contribution of essential genes from Plasmodium falciparum by the conditional CRISPR-/deadCas9-based interference and activation (i/a) systems. We screened both CRISPRi and CRISPRa sets, consisting of nine parasite lines per set targeting nine genes via their respective gRNAs. By conducting amplicon sequencing of gRNA loci, we identified the contribution of each targeted gene to parasite fitness upon drug (artemisinin, chloroquine) and stress (starvation, heat shock) treatment. The screening was highly reproducible, and the screening libraries were easily generated by transfection of mixed plasmids expressing different gRNAs. We demonstrated that this screening is straightforward, robust, and can provide a fast and efficient tool to study essential genes that have long presented a bottleneck in assessing their functions using existing genetic tools.

MYST regulates DNA repair and forms a NuA4-like complex in the malaria parasite Plasmodium falciparum.

Histone lysine acetyltransferase MYST-associated NuA4 complex is conserved from yeast to humans and plays key roles in cell cycle regulation, gene transcription, and DNA replication/repair. Here, we identified a Plasmodium falciparum MYST-associated complex, PfNuA4, which contains 11 of the 13 conserved NuA4 subunits. Reciprocal pulldowns using PfEAF2, a shared component between the NuA4 and SWR1 complexes, not only confirmed the PfNuA4 complex but also identified the PfSWR1 complex, a histone remodeling complex, although their identities are low compared to the homologs in yeast or humans. Notably, both H2A.Z/H2B.Z were associated with the PfSWR1 complex, indicating that this complex is involved in the deposition of H2A.Z/H2B.Z, the variant histone pair that is enriched in the activated promoters. Overexpression of PfMYST resulted in earlier expression of genes involved in cell cycle regulation, DNA replication, and merozoite invasion, and upregulation of the genes related to antigenic variation and DNA repair. Consistently, PfMYST overexpression led to high basal phosphorylated PfH2A (γ-PfH2A), the mark of DNA double-strand breaks, and conferred protection against genotoxic agent methyl methanesulfonate (MMS), X-rays, and artemisinin, the first-line antimalarial drug. In contrast, the knockdown of PfMYST caused a delayed parasite recovery upon MMS treatment. MMS induced the gradual disappearance of PfMYST in the cytoplasm and concomitant accumulation of PfMYST in the nucleus, suggesting cytoplasm-nucleus shuttling of PfMYST. Meanwhile, PfMYST colocalized with the γ-PfH2A, indicating PfMYST was recruited to the DNA damage sites. Collectively, PfMYST plays critical roles in cell cycle regulation, gene transcription, and DNA replication/DNA repair in this low-branching parasitic protist.IMPORTANCEUnderstanding gene regulation and DNA repair in malaria parasites is critical for identifying targets for antimalarials. This study found PfNuA4, a PfMYST-associated, histone modifier complex, and PfSWR1, a chromatin remodeling complex in malaria parasite Plasmodium falciparum. These complexes are divergent due to the low identities compared to their homologs from yeast and humans. Furthermore, overexpression of PfMYST resulted in substantial transcriptomic changes, indicating that PfMYST is involved in regulating the cell cycle, antigenic variation, and DNA replication/repair. Consistently, PfMYST was found to protect against DNA damage caused by the genotoxic agent methyl methanesulfonate, X-rays, and artemisinin, the first-line antimalarial drug. Additionally, DNA damage led to the relocation of cytoplasmic PfMYST to the nucleus and colocalization of PfMYST with γ-PfH2A, the mark of DNA damage. In summary, this study demonstrated that the PfMYST complex has critical functions in regulating cell cycle, antigenic variation, and DNA replication/DNA repair in P. falciparum.

Expert consensus on Prospective Precision Diagnosis and Treatment Strategies for Osteoporotic Fractures.

Osteoporotic fractures are the most severe complications of osteoporosis, characterized by poor bone quality, difficult realignment and fixation, slow fracture healing, and a high risk of recurrence. Clinically managing these fractures is relatively challenging, and in the context of rapid aging, they pose significant social hazards. The rapid advancement of disciplines such as biophysics and biochemistry brings new opportunities for future medical diagnosis and treatment. However, there has been limited attention to precision diagnosis and treatment strategies for osteoporotic fractures both domestically and internationally. In response to this, the Chinese Medical Association Orthopaedic Branch Youth Osteoporosis Group, Chinese Geriatrics Society Geriatric Orthopaedics Committee, Chinese Medical Doctor Association Orthopaedic Physicians Branch Youth Committee Osteoporosis Group, and Shanghai Association of Integrated Traditional Chinese and Western Medicine Osteoporosis Professional Committee have collaborated to develop this consensus. It aims to elucidate emerging technologies that may play a pivotal role in both diagnosis and treatment, advocating for clinicians to embrace interdisciplinary approaches and incorporate these new technologies into their practice. Ultimately, the goal is to improve the prognosis and quality of life for elderly patients with osteoporotic fractures.

Epilepsy EEG signals classification based on sparse principal component logistic regression model.

Epilepsy is a chronic brain disease caused by excessive discharge of brain neurons. Long-term recurrent seizures bring a lot of trouble to patients and their families. Prediction of different stages of epilepsy is of great significance. We extract pearson correlation coefficients (PCC) between channels in different frequency bands as features of EEG signals for epilepsy stages prediction. However, the features are of large feature dimension and serious multi-collinearity. To eliminate these adverse influence, the combination of traditional dimension reduction method principal component analysis (PCA) and logistic regression method with regularization term is proposed to avoid over-fitting and achieve the feature sparsity. The experiments are conducted on the widely used CHB-MIT dataset using different regularization terms L1 and L2, respectively. The proposed method identifies various stages of epilepsy quickly and efficiently, and it presents the best average accuracy of 94.86%, average precision of 96.71%, average recall of 93.48%, average kappa value of 0.90 and average Matthews correlation coefficient (MCC) value of 0.90 for all patients.

Finite element analysis of different pedicle screw internal fixations for first lumbar vertebral fracture in different sports conditions.

OBJECTIVE: Lumbar fractures are the most common spinal injuries, and surgery is required for severe fracture. This study aimed to investigate the variations in motion and stress in varying states of activity after minimally invasive and traditional open pedicle screw placement for L1 vertebral fracture stabilization. METHODS: We studied a male volunteer (26 years old) with no history of chronic back pain or lumbar spine trauma. We used the finite element method for this investigation. Using finite element software, we created a three-dimensional model of L1 vertebral compression fracture. We also constructed models for four percutaneous pedicle screws spanning the fractured vertebra and four screws traversing the damaged vertebra with transverse fixation. RESULTS: In all three-dimensional movement directions, the open pedicle fixation system experienced maximum stress higher than its percutaneous counterpart. With axial spinal rotation, von Mises stress on the traditional open pedicle screw was considerably lower than that with percutaneous pedicle fixation, but peak stress was elevated at the transverse connection. Traditional open pedicle fixation displayed less maximum displacement than percutaneous pedicle internal fixation. CONCLUSIONS: During axial spinal movements, high peak stress is observed at the transverse connection. Patients should avoid excessive axial rotation of the spine during recovery.

Efficacy of traditional Chinese medicine containing hawthorn for hyperlipidemia: a systematic review and meta-analysis.

The traditional Chinese herb hawthorn is gaining attention for its potential to lower lipid levels due to its active components that positively influence lipid metabolism. Our meta-analysis of fourteen randomized controlled trials compared traditional Chinese medicine containing hawthorn with conventional lipid-lowering drugs for hyperlipidemia. Hawthorn-based medicine showed promise in reducing total cholesterol and triglycerides while increasing high-density lipoprotein cholesterol levels, albeit less effective than standard drugs in lowering low-density lipoprotein cholesterol. However, caution is needed due to methodological limitations in some trials, emphasizing the importance of further well-designed studies to clarify hawthorn's efficacy in managing hyperlipidemia.

Finite element biomechanical analysis of 3D printed intervertebral fusion cage in osteoporotic population.

OBJECTIVE: To study the biomechanical characteristics of each tissue structure when using different 3D printing Cage in osteoporotic patients undergoing interbody fusion. METHODS: A finite element model of the lumbar spine was reconstructed and validated with regarding a range of motion and intervertebral disc pressure from previous in vitro studies. Cage and pedicle screws were implanted and part of the lamina, spinous process, and facet joints were removed in the L4/5 segment of the validated mode to simulate interbody fusion. A 280 N follower load and 7.5 N·m moment were applied to different postoperative models and intact osteoporotic model to simulate lumbar motion. The biomechanical characteristics of different models were evaluated by calculating and analyzing the range of motion of the fixed and cephalic adjacent segment, the stress of the screw-rod system, the stress at the interface between cage and L5 endplate, and intervertebral disc pressure of the adjacent segment. RESULTS: After rigid fixation, the range of motion of the fixed segment of model A-C decreased significantly, which was much smaller than that of the osteoporotic model. And with the increase of the axial area of the interbody fusion cages, the fixed segment of model A-C tended to be more stable. The range of motion and intradiscal pressure of the spinal models with different interbody fusion cages were higher than those of the complete osteoporosis model, but there was no significant difference between the postoperative models. On the other hand, the L5 upper endplate stress and screw-rod system stress of model A-C show a decreasing trend in different directions of motion. The stress of the endplate is the highest during flexion, which can reach 40.5 MPa (model A). The difference in endplate stress between models A-C was the largest during lateral bending. The endplate stress of models A and B was 150.5% and 140.9% of that of model C, respectively. The stress of the screw-rod system was the highest during lateral bending (model A, 102.0 MPa), which was 108.4%, 102.4%, 110.4%, 114.2% of model B and 158.5%, 110.1%, 115.8%, 125.4% of model C in flexion, extension, lateral bending, and rotation, respectively. CONCLUSIONS: For people with osteoporosis, no matter what type of cage is used, good immediate stability can be achieved after surgery. Larger cage sizes provide better fixation without significantly increasing ROM and IDP in adjacent segments, which may contribute to the development of ASD. In addition, larger cage sizes can disperse endplate stress and reduce stress concentration, which is of positive significance in preventing cage subsidence after operation. The cage and screw rod system establish a stress conduction pathway on the spine, and a larger cage greatly enhances the stress-bearing capacity of the front column, which can better distribute the stress of the posterior spine structure and the stress borne by the posterior screw rod system, reduce the stress concentration phenomenon of the nail rod system, and avoid exceeding the yield strength of the material, resulting in the risk of future instrument failure.

OGG1 prevents atherosclerosis-induced vascular endothelial cell injury through mediating DNA damage repair.

OBJECTIVE: This study was designed to investigate the role of 8-oxoguanine DNA glycosylase 1 (OGG1) in preventing atherosclerosis-induced vascular EC injury, thereby providing a theoretical basis for the exploration of drug targets and treatment methods for atherosclerosis. METHODS: Human umbilical vein cell line (EA.hy926) was treated with ox-LDL to construct an in vitro atherosclerotic cell model. pcDNA3.1-OGG1 was transfected into EA.hy926 cells to overexpress OGG1. qRT-PCR, CCK-8 assay, flow cytometry, oil red O staining, ELISA, comet assay and western blot were used to evaluate the OGG1 expression, viability, apoptosis level, lipid droplet content, 8-OHdG level and DNA damage of cells in each group. RESULTS: Compared with the Control group, ox-LDL stimulation of endothelial cells significantly decreased cell viability, promoted apoptosis and DNA damage, and increased intracellular levels of 8-OHdG and γH2AX, while decreasing protein levels of PPARγ, FASN, FABP4, RAD51 and POLB. However, overexpression of OGG1 can significantly inhibit ox-LDL damage to endothelial cells, promote lipid metabolism, decrease lipid droplet content, and improve DNA repair function. CONCLUSION: Over-expression of OGG1 improves DNA repair. Briefly, OGG1 over-expression enhances the DNA damage repair of ECs by regulating the expression levels of γH2AX, RAD51 and POLB, thereby enhancing cell viability and reducing apoptosis.

Ultra-high resistive switching current ratio and improved ferroelectricity and dielectric tunability performance in a BaTiO3/La0.7Sr0.3MnO3 heterostructure by inserting a SrCoO2.5 layer.

A BaTiO3/SrCoO2.5 (BTO/SCO) bilayer and a BTO single film were prepared by radio frequency magnetron sputtering on La0.7Sr0.3MnO3 (LSMO) buffered SrTiO3 (001) substrates. Interestingly, compared with reported BTO-based films, the BTO/SCO/LSMO heterostructure has a maximum ON/OFF current ratio of ∼945. More interestingly, compared with the BTO single layer, a larger Pr (∼18.4 µC cm-2) and larger dielectric tunability (∼71.9%) were achieved in the BTO/SCO bilayer. The improved performance may be attributed to the large tetragonality and improved oxygen vacancy concentrations in the BTO/SCO/LSMO heterostructure. Furthermore, our BTO/SCO/LSMO stacks exhibit potential for flexible electronic informational devices.

Bibliometric Analysis of the Development, Current Status, and Trends in Adult Degenerative Scoliosis Research: A Systematic Review from 1998 to 2023.

Purpose: Adult degenerative scoliosis (ADS) research lacks bibliometric analysis, despite numerous studies. This study aimed to systematically analyze the development, current status, hot topics, frontier areas, and trends in ADS research. Patients and Methods: A systematic literature review was conducted in the Web of Science Core Collection database from January 1998 to June 2023. Information regarding the country, institution, author, journal, and keywords was collected for each article. Bibliometric analysis was performed using VOSviewer and Citespace software. Results: The final analysis covered 1695 publications, demonstrating a steady increase in ADS research. The United States was the most prolific and influential country with 684 publications, followed by China and Japan. The University of California System was the most productive institution with 113 publications. Shaffrey, CI (47 publications) and Lenke, LG (41 publications) were top authors. The analysis revealed seven main research clusters: "intervertebral disc", "adult spinal deformity", "lumbar fusion", "minimally invasive surgery", "navigation", "postoperative complications", and "mental retardation". Keywords with strong bursts of activity included degeneration, prevalence, imbalance, classification, lumbar spinal stenosis, and kyphosis. Conclusion: In conclusion, in recent years, ADS research has undergone rapid development. This study analyzed its hot topics, advancements, and research directions, making it the latest bibliometric analysis in this field. The findings aim to provide a new perspective and guidance for clinical practitioners and researchers.

Identification of differentially expressed genes, signaling pathways and immune infiltration in postmenopausal osteoporosis by integrated bioinformatics analysis.

Background: Postmenopausal osteoporosis is a systemic metabolic disorder typified by an imbalance in bone turnover, where bone resorption supersedes bone formation. This imbalance primarily arises from a decline in bone mass induced by estrogen deficiency, and an elevated risk of fractures resulting from degradation of bone microstructure. Despite recognizing these changes, the precise causative factors and potential molecular pathways remain elusive. In this study, we aimed to identify differentially expressed genes (DEGs), associated pathways, and the role of immune infiltration in osteoporosis, leveraging an integrated bioinformatics approach to shed light on potential underlying molecular mechanisms. Methods: We retrieved the expression profiles of GSE230665 from the Gene Expression Omnibus database, comprising 15 femur samples, including 12 postmenopausal osteoporosis samples and 3 normal controls. From the aggregated microarray datasets, we derived differentially expressed genes (DEGs) for further bioinformatics analysis. We used WGCNA, analyzed DEGs, PPI, and conducted GO analysis to identify pivotal genes. We then used the CIBERSORT method to explore the degree of immune cell infiltration within femur specimens affected by postmenopausal osteoporosis. To probe into the relationship between pivotal genes and infiltrating immune cells, we conducted correlation analysis. Results: We identified a total of 12,204 DEGs. Among these, 12,157 were up-regulated, and 47 were down-regulated. GO and KEGG pathway analyses indicated that these DEGs predominantly targeted cellular protein localization activity and associated signaling pathways. The protein-protein interaction network highlighted four central hub-genes: RPL31, RPL34, EEF1G, and BPTF. Principal component analysis indicated a positive correlation between the expression of these genes and resting NK cells (as per CIBERSORT). In contrast, the expression of RPL31, RPL34, and EEF1G showed a negative correlation with T cells (gamma delta per CIBERSORT). Conclusions: Immune infiltration plays a role in the development of osteoporosis.

Effect of different loads on facet joint motion during lumbar lateral bending in sitting position.

OBJECTIVE: To study the effect of weight-bearing on lumbar facet joint during lateral bending in sitting position. METHODS: Ten normal healthy people (5 males and 5 females) aged 25-39 years (mean 32 ± 4.29 years) were recruited. CT scanning was used to reconstruct the lumbar spine model, and then dual fluoroscopic image system (DFIS) was used to restore the lumbar facet joint movement in sitting position. Finally, the lumbar facet joint translation distance and rotation angle were measured. RESULTS: In L3-4 level, the displacement of right facet joint in Y-axis was the smallest at 0.05 ± 0.40 mm, the displacement of 0 kg left facet joint in X-axis was the largest at 1.68 ± 0.85 mm, and the rotation angle was - 0.57 ± 1.43° to 5.66 ± 2.70° at 10 kg; in L4-5 level, the displacement of right facet joint in Y-axis was the smallest at 10 kg, - 0.13 ± 0.91 mm, and the displacement of left facet joint in Z-axis was the largest at - 2.11 ± 0.88 mm, and the rotation angle was 0.21 ± 2.14° to 7.89 ± 2.59° at 10 kg; in L5-S1 level, the displacement of right facet joint in Y-axis was the smallest at 10 kg, - 0.17 ± 1.10 mm, and the displacement of 0 kg left facet joint in X-axis was the largest at 2.19 ± 2.28 mm, and the rotation angle was 0.03 ± 2.02° to 3.98 ± 0.37°. CONCLUSION: In sitting position, weight-bearing has certain influence on the displacement of facet joints during lumbar lateral bending movement, and this influence occurs simultaneously in translation and rotation; the left and right facet joints are not symmetrical during lumbar lateral bending movement.

Solvent- and Additive-Free Dehydrogenation of N-Heterocycles with Oxygen Catalyzed by Polyoxovanadate-Based Metal-Organic Frameworks.

N-heteroarenes are a family of organics with significant chemical and pharmaceutical applications. They are generally prepared by the catalytic oxidative dehydrogenation (ODH) of partially saturated N-heterocycles. In this work, we prepare and demonstrate the catalytic ODH applications of two polyoxovanadate-based metal-organic frameworks of the general formula {[MII(bibp)1.5][VV2O6]}·H2O (M = Ni 1, Co 2; bibp = 4,4'-bis(imidazol-1-ylmethyl)biphenyl). They are based on nonprecious metals, need no additives or organic solvents typically required for catalytic ODH, and utilize molecular O2 as the oxidant, thus possessing all the traits desirable for practical catalysis. Catalyst 1 shows tolerance for a range of substrates with different electronic and steric features, including 2,3-dihydro-1H-indole and tetrahydroquinolines substituted with various functional groups. Mechanistic studies supported primarily by evidence from electron paramagnetic resonance and X-ray photoelectron spectra suggest that the VV sites in 1 are catalytically responsible, first enabling the formation of the substrate-based radical species by a single electron transfer event while being converted into its mixed-valence form, followed by the production of the superoxide radical anion (O2•-) upon contact with O2. The reaction mixture containing O2•- and the initially formed substrate-based radical then undergoes a series of steps, including the hydrogen abstraction and formation of the hydroperoxyl radical, the production and tautomerization of the partially dehydrogenated intermediate, and finally a repeating cycle of the aforementioned steps, to achieve the high-yield conversion of substrates to the corresponding N-heteroarenes.

Biomechanical differences between two different shapes of oblique lumbar interbody fusion cages on whether to add posterior internal fixation system: a finite element analysis.

BACKGROUND: Oblique lateral lumbar fusion (OLIF) is widely used in spinal degeneration, deformity and other diseases. The purpose of this study was to investigate the biomechanical differences between two different shapes of OLIF cages on whether to add posterior internal fixation system, using finite element analysis. METHODS: A complete three-dimensional finite element model is established and verified for L3-L5. Surgical simulation was performed on the verified model, and the L4-L5 was the surgical segment. A total of the stand-alone group (Model A1, Model B1) and the BPSF group (Model A2, Model B2) were constructed. The four OLIF surgical models were: A1. Stand-alone OLIF with a kidney-shaped Cage; B1. Stand-alone OLIF with a straight cage; A2. OLIF with a kidney-shaped cage + BPSF; B2. Stand-alone OLIF with a straight cage + BPSF, respectively. The differences in the range of motion of the surgical segment (ROM), equivalent stress peak of the cage (ESPC), the maximum equivalent stress of the endplate (MESE) and the maximum stress of the internal fixation (MSIF) were compared between different models. RESULTS: All OLIF surgical models showed that ROM declines between 74.87 and 96.77% at L4-L5 operative levels. The decreasing order of ROM was Model A2 > Model B2 > Model A1 > Model A2. In addition, the ESPC and MESE of Model A2 are smaller than those of other OLIF models. Except for the left-bending position, the MSIF of Model B2 increased by 1.51-16.69% compared with Model A2 in each position. The maximum value of MESE was 124.4 Mpa for Model B1 in the backward extension position, and the minimum value was 7.91 Mpa for Model A2 in the right rotation. Stand-alone group showed significantly higher ROMs and ESPCs than the BPSF group, with maximum values of 66.66% and 70.59%. For MESE, the BPSF group model can be reduced by 89.88% compared to the stand-alone group model. CONCLUSIONS: Compared with the traditional straight OLIF cage, the kidney-shaped OLIF cage can further improve the stability of the surgical segment, reduce ESPC, MESE and MSIF, and help to reduce the risk of cage subsidence.

Biomechanical behaviour of a novel bone cement screw in the minimally invasive treatment of Kummell's disease: a finite element study.

OBJECTIVE: To investigate and evaluate the biomechanical behaviour of a novel bone cement screw in the minimally invasive treatment of Kummell's disease (KD) by finite element (FE) analysis. METHODS: A validated finite element model of healthy adult thoracolumbar vertebrae T12-L2 was given the osteoporotic material properties and the part of the middle bone tissue of the L1 vertebral body was removed to make it wedge-shaped. Based on these, FE model of KD was established. The FE model of KD was repaired and treated with three options: pure percutaneous vertebroplasty (Model A), novel unilateral cement screw placement (Model B), novel bilateral cement screw placement (Model C). Range of motion (ROM), maximum Von-Mises stress of T12 inferior endplate and bone cement, relative displacement of bone cement, and stress distribution of bone cement screws of three postoperative models and intact model in flexion and extension, as well as lateral bending and rotation were analyzed and compared. RESULTS: The relative displacements of bone cement of Model B and C were similar in all actions studied, and both were smaller than that of Model A. The minimum value of relative displacement of bone cement is 0.0733 mm in the right axial rotation of Model B. The maximum Von-Mises stress in T12 lower endplate and bone cement was in Model C. The maximum Von-Mises stress of bone cement screws in Model C was less than that in Model B, and it was the most substantial in right axial rotation, which is 34%. There was no substantial difference in ROM of the three models. CONCLUSION: The novel bone cement screw can effectively reduce the relative displacement of bone cement by improving the stability of local cement. Among them, novel unilateral cement screw placement can obtain better fixation effect, and the impact on the biomechanical environment of vertebral body is less than that of novel bilateral cement screw placement, which provides a reference for minimally invasive treatment of KD in clinical practice.

A comparative analysis of using cage acrossing the vertebral ring apophysis in normal and osteoporotic models under endplate injury: a finite element analysis.

Background: Lateral lumbar fusion is an advanced, minimally invasive treatment for degenerative lumbar diseases. It involves different cage designs, primarily varying in size. This study aims to investigate the biomechanics of the long cage spanning the ring apophysis in both normal and osteoporotic models, considering endplate damage, using finite element analysis. Methods: Model 1 was an intact endplate with a long cage spanning the ring apophysis. Model 2 was an endplate decortication with a long cage spanning the ring apophysis. Model 3 was an intact endplate with a short cage. Model 4 was an endplate decortication with a short cage. On the basis of the four original models, further osteoporosis models were created, yielding a total of eight finite element models. The provided passage delineates a study that elucidates the utilization of finite element analysis as a methodology to simulate and analyze the biomechanical repercussions ensuing from the adoption of two distinct types of intervertebral fusion devices (cages) within the physiological framework of a human body. Results: The investigation found no appreciable changes between Models 1 and 2 in the range of motion at the fixed and neighboring segments, the L3-4 IDP, screw-rod stress, endplate stress, or stress on the trabecular bone of the L5. Increases in these stresses were seen in models 3 and 4 in the ranges of 0.4%-676.1%, 252.9%-526.9%, 27.3%-516.6%, and 11.4%-109.3%, respectively. The osteoporotic models for scenarios 3 and 4 exhibit a similar trend to their respective normal bone density models, but these osteoporotic models consistently have higher numerical values. In particular, except for L3-4 IDP, the maximum values of these parameters in osteoporotic Models 3 and 4 were much higher than those in normal bone quality Models 1 and 2, rising by 385.3%, 116%, 435.1%, 758.3%, and 786.1%, respectively. Conclusion: Regardless of endplate injury or osteoporosis, it is advised to utilize a long cage that is 5 mm longer on each side than the bilateral pedicles because it has good biomechanical features and may lower the likelihood of problems after surgery. Additionally, using Long cages in individuals with osteoporosis may help avoid adjacent segment disease.

Oblique lateral interbody fusion combined with unilateral versus bilateral posterior fixation in patients with osteoporosis.

PURPOSE: To compare the clinical efficacy of oblique lateral interbody fusion (OLIF) combined with unilateral (UPSF) and bilateral pedicle screw internal fixation (BPSF) in patients with osteoporosis. METHODS: Clinical data of 57 patients who underwent single-segment OLIF surgery with a clear diagnosis of osteoporosis from December 2018 to May 2021 were retrospectively analyzed, of which 27 patients underwent OLIF + UPSF and 30 patients underwent OLIF + BPSF. Surgical technique-related indexes were recorded, including operative time, operative blood loss and postoperative hospital stay; clinical outcome-related indexes included postoperative complications, Visual analogue scale (VAS) and Oswestry disability index (ODI) at preoperative, 1 week, 1 month, 3 months, and 12 months postoperative follow-up; and imaging outcome-related indexes included the measurement of preoperative and postoperative segmental lordosis (SL), and observation of the degree of cage subsidence and bone graft fusion. RESULTS: The surgery was successfully performed in 57 patients, and there was no statistical difference in operative blood loss and postoperative hospital stay between UPSF group and BPSF group (P > 0.05). In terms of operative time, there was a significant difference (UPSF group: 92.30 ± 11.03 min, BPSF group: 119.67 ± 16.41, P < 0.05). Postoperative VAS and ODI scores exhibited significant improvement (P < 0.05). At the 12 months postoperative follow-up, the VAS and ODI scores in the BPSF group were significantly better than those in the UPS group (P < 0.05). Compared with the preoperative images, the SL was significantly improved in both groups after surgery (P < 0.05). At 6 months postoperatively, the fusion rate in the UPSF group was significantly lower than that in the BPSF group (P < 0.05). At 1 year postoperatively, the fusion rate in the UPSF group was not significantly different from that in the BPSF group (P > 0.05). At 1 year postoperatively, the rate and degree of cage subsidence was higher in the UPSF group than in the BPSF group (P < 0.05). CONCLUSION: In the long term, OLIF combined with bilateral posterior fixation applied to the osteoporosis patients is superior to OLIF surgery combined with unilateral posterior fixation in terms of clinical and imaging outcomes. It is effective in improving pain relief and functional improvement, accelerating bone graft fusion, and reducing cage subsidence compared with UPSF.

MalariaSED: a deep learning framework to decipher the regulatory contributions of noncoding variants in malaria parasites.

Malaria remains one of the deadliest infectious diseases. Transcriptional regulation effects of noncoding variants in this unusual genome of malaria parasites remain elusive. We developed a sequence-based, ab initio deep learning framework, MalariaSED, for predicting chromatin profiles in malaria parasites. The MalariaSED performance was validated by published ChIP-qPCR and TF motifs results. Applying MalariaSED to ~ 1.3 million variants shows that geographically differentiated noncoding variants are associated with parasite invasion and drug resistance. Further analysis reveals chromatin accessibility changes at Plasmodium falciparum rings are partly associated with artemisinin resistance. MalariaSED illuminates the potential functional roles of noncoding variants in malaria parasites.

Plasmodium falciparum GCN5 plays a key role in regulating artemisinin resistance-related stress responses.

Plasmodium falciparum causes the most severe malaria and is exposed to various environmental and physiological stresses in the human host. Given that GCN5 plays a critical role in regulating stress responses in model organisms, we aimed to elucidate PfGCN5's function in stress responses in P. falciparum. The protein level of PfGCN5 was substantially induced under three stress conditions [heat shock, low glucose starvation, and dihydroartemisinin, the active metabolite of artemisinin (ART)]. With a TetR-DOZI conditional knockdown (KD) system, we successfully down-regulated PfGCN5 to ~50% and found that KD parasites became more sensitive to all three stress conditions. Transcriptomic analysis via RNA-seq identified ~1,000 up- and down-regulated genes in the wild-type (WT) and KD parasites under these stress conditions. Importantly, DHA induced transcriptional alteration of many genes involved in many aspects of stress responses, which were heavily shared among the altered genes under heat shock and low glucose conditions, including ART-resistance-related genes such as K13 and coronin. Based on the expression pattern between WT and KD parasites under three stress conditions, ~300-400 genes were identified to be involved in PfGCN5-dependent, general, and stress-condition-specific responses with high levels of overlaps among three stress conditions. Notably, using ring-stage survival assay, we found that KD or inhibition of PfGCN5 could sensitize the ART-resistant parasites to the DHA treatment. All these indicate that PfGCN5 is pivotal in regulating general and ART-resistance-related stress responses in malaria parasites, implicating PfGCN5 as a potential target for malaria intervention.